Filter
Top Products
1-34
Adjusting Exposure and Image Quality (Copy Exposure)
Basic Copying
1
Selecting Image Quality
You can adjust image quality to the level best suited for the quality of text or photo originals.
The following three modes are available for adjusting image quality:
IMPORTANT
• You must select only one of these modes. You cannot use a combination of these modes at one time.
NOTE
• When you select the Text, Text/Photo, or Photo mode, the exposure can be adjusted only by Manual Exposure
Control. Automatic Exposure Control cannot be selected.
• When the Photo Mode in Copy Settings is ‘On,’ you can select [Printed Image] or [Photo] after pressing the
drop-down list. (See “Setting the Photo Mode for the Copy Function,” on p. 3-9.)
• If the original is a transparency, select the Text, Text/Photo, or Photo mode, and adjust the exposure to the most
appropriate level.
■
Text Mode
This mode is best suited for making copies from text originals. Blueprints or penciled originals can be
copied clearly.
■ Text/Photo Mode
This mode is best suited for making copies from originals containing both text and photos.
■ Photo Mode
This mode is best suited for making copies from photos printed on photographic paper,
or photo originals containing half-tones (i.e., printed photos).
Text/Photo Mode
Photo Mode
Text Mode