Canon IR3320N Printer User Manual


 
1-60
Collating Copies (Finisher)
Basic Copying
1
Collating Copies (Finisher)
The Finisher mode can be selected to collate copies in various ways, either by pages or copy sets.
The copied paper is output as face down.
NOTE
When envelopes, tracing paper, transparencies, or labels are selected, the Finisher functions cannot be set.
When heavyweight paper, letterhead, or bond is selected, the Staple or Hole Punch mode cannot be set.
Below is a list of the finishing functions and paper sizes available for each optional unit.
*1 If Tray A is selected as a designated tray from the Additional Functions screen Common Settings Tray Designation
screen, Offset is applied. If it is not selected, Rotate is applied.
*2 Stapling position cannot be selected.
Optional units Offset Rotate
Staple
Hole
Punch
Corner Double
Saddle
Stitch
None
A4, A4R,
A5, A5R
–––
Finisher-J1
A3, A4,
A4R, A5
*2
A3:
15 sheets;
A4, A4R:
30 sheets
–––
Inner 2way Tray-A1
A4, A4R,
A5, A5R
–––
Copy Tray-F1
Saddle Finisher-G1
*1
A3, A4,
A4R, A5
*1
A4, A4R,
A5, A5R
A3:
25 sheets;
A4, A4R:
50 sheets
A3:
25 sheets;
A4, A4R:
50 sheets
A3, A4R:
10 sheets
Puncher Unit-J1
A3, A4,
A4R:
2 holes;
Puncher Unit-G1
A3, A4:
4 holes;
: Setting available
–: Setting unavailable