Filter
Top Products
Additional Copy Functions
2
2-35
Erasing Shadows and Frame Lines from Copies (Frame Erase)
If you select [Adjust Each Dim.], press [Top], [Left], [Center], [Right], and [Bottom] to set the frame width to
erase by using [–] or [+], and press [Next].
When entering values in millimetres, you can use - (numeric keys) and to clear your entries.
If you enter the value with - (numeric keys), you can change the entered value by pressing
[–] or [+].
The screen for the next step is displayed.
If you enter a value outside the setting range, a message prompting you to enter an appropriate value
appears on the screen.
NOTE
• If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the Additional Functions
beforehand. (See Chapter 3, “Selecting and Storing Settings to Suit Your Needs,” in the Reference Guide.)
• The default settings are ‘10 mm’ for [Center], and ‘4 mm’ for [Top], [Left], [Right], [Bottom], and [Sides].
The maximum frame erase width area is ‘50 mm.’