Canon IR3320N Printer User Manual


 
2-32
Erasing Shadows and Frame Lines from Copies (Frame Erase)
Additional Copy Functions
2
If you press [Adjust Each Dim.], select the frame erase values by pressing [–] or [+], and press [Next].
When entering values in millimetres, you can use - (numeric keys) and .
If you enter the value with - (numeric keys), you can change the entered value by pressing
[–] or [+].
The screen for the next step is displayed.
If you enter a value outside the setting range, a message prompting you to enter an appropriate value
appears on the screen.
NOTE
If you want to enter values in inches, press [Inch]. Set the inch entry function to [On] in the Additional Functions
beforehand. (See Chapter 3, “Selecting and Storing Settings to Suit Your Needs,” in the Reference Guide.)
The default setting is ‘4 mm’ for each side. The maximum frame erase width area is ‘50 mm.’