Filter
Top Products
Light Number of Beeps Printer Condition and Status/Solution
— Normal (setup or cleaning is in process).
Wait until the flashing light goes out.
The BJ cartridge access cover is open.
Close the BJ cartridge access cover.
When replacing BJ cartridges and ink
tanks, close the access cover after you
have finished replacement, then wait
until the flashing light goes out.
— Normal (receiving print data).
Wait for printing to begin.
1 Paper is not loaded correctly.
Check the feed areas and reload the paper
(see page 3-3).
2 Paper is jammed.
Remove the jammed paper (see page 3-8).
3 The BJ cartridge is not inserted correctly.
Remove the BJ cartridge and reinsert it
(see page 2-14).
4 The BJ cartridge is overheated.
Stop printing and wait until the BJ cartridge
cools. When the cartridge cools, the light
stops flashing.
— A serious error has occurred.
Turn off the power, wait approximately 15
seconds, and then turn it back on. If the
lights continue flashing, contact the Canon
Customer Care Center (see page 1-13).
5-2 Troubleshooting Chapter 5