Filter
Top Products
3-12
SmartBase MPC200/imageCLASS MPC200
Chapter 3: Assembly and Disassembly
Replacement of waste ink absorbers
The waste ink absorbers are designed to sop up any excess ink ejected during the
cleaning operation or during ink squirting for maintenance, in order to maintain the
good printing quality of the BJ cartridge. The volume of ink absorbed is counted and
these data stored in the EEPROM on the SPCNT board. Once the volume is judged to
have reached 100%, the message "CHECK PRINTER" (error code ##343) will be
displayed, and printing will stop, in order to ensure that the volume of ink absorbed does
not exceed the allowed limit. To clear this error, you need to replace the waste ink
absorbers and reset the waste ink volume counter. Refer to Chapter 4, 4.2.2 error code,
Action for ##343, for details on how to reset the waste ink volume counter.
NOTE
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com