Filter
Top Products
4-30
SmartBase MPC200/imageCLASS MPC200
Chapter 4: Maintenance & Service
6.2 Service Test Functions
The fax functions for testing individual operations, such as below.
See
this chapter 5.2.2 Service data registration/setting method
for details of entering the test mode. To
leave the test mode, press the Stop/Reset
button, and then ON/OFF button.
6.2.1 Test mode overview
Test mode can be executed by following the menu items from the display.
a) DRAM tests
Writes data to DRAM image storage areas and reads that data to check operations.
b) CS test
CS test is used to enter the contact sensor's shading data.
c) Faculty tests
Test the operation of operation panel and sensor functions.
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.comDownload Free Service Manual And Resetter Printer at http://printer1.blogspot.com