Filter
Top Products
5-1
SmartBase MPC200/imageCLASS MPC200
Chapter 5: Appendix
1. INSTALLATION
This machine has been designed for user installation. Therefore, this manual
containsonly an outline description of the procedures. For details of the installation, see
the QUICK START GUIDE.
1.1 Setting up
• Choosing a Location for Your MultiPASS
• Do you have everything?
Check that nothing is missing when the unit is unpacked.
• Removing shipping materials.
Peel off all strips of tape from the unit.
• Assembling the MultiPASS
• Making Connections
Connect the USB cable.
• Powering up.
Connect the power cord and check that power supplied.
• Installing the BJ cartridge.
Unseal the BJ cartridge, and load it into the machine.
• Loading Paper
Set paper in the auto sheet feeder, in PAPER SIZE under PAPER SELECT, set the size of paper that is to
be used.
1.2 Checking Operations
• Copy operation
Make a copy, and check that the operation is normal.
• Communication test
Transmit to, and receive from other facsimiles, and check that images are sent normally when transmitted,
and are printed normally when received.
What to do when trouble occurs
Very rarely, during use, the display may go out, all the buttons may stop working, or some
other trouble may occur because of strong electrical noise or a large amount of static. If
such trouble occurs, initialize the RAM. During installation, we recommend that you per-
form the all clear operation after the power on. Refer to
NOTE: “ALL clear” when nothing
works on Page 3-3
.
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com