Filter
Top Products
14
STEP 4 Turning the Power ON
1
Raise the feed tray slightly while pressing the feed tray
release lever.
2
Extend the front panel of the feed tray before opening the
entire feed tray.
The scanner turns ON, and the Start button lights.
Hint
In Windows, a balloon message such as shown below appears on the
task bar. If you wait a while, automatic scanner recognition will end
and the scanner will become ready to use.
Ð
When the scanner is properly connected to the computer, the
(CaptureOnTouch) icon appears on the taskbar (or menu bar) as
follows.
Windows taskbar
Mac OS X menu bar
If the taskbar icon appears as ( ), the scanner is not properly
connected to the computer. Check the status of the power switch and
USB cable.
This completes setup.