Filter
Top Products
31
IMPORTANT
• When loading a multi-page document, place the pages of the
document with their edges slightly askew.
• If the document is curved, straighten the document before
loading it.
• The scanned document is ejected from the front. Do not place
any objects in front of the scanner.
• If double-feeding occurs, reduce the number of pages that you
load into the scanner at one time.
• Depending on paper quality, you may hear unusual noises
while scanning some documents, but this does not indicate a
malfunction.
Placing Cards
Use the card slot when scanning plastic cards. Use the following
procedure to scan the cards one by one.
1
Open the document feed tray. (See p. 30)
2
Turn the card face up, and insert the card straight into the
card slot.
When the edge of the card touches the slot, the rollers will move
automatically. The roller will stop when it has caught the edge of
the card, allowing you to let go of the card and start scanning from
an application.
The card will be fed when you start scanning with an application
program. After the card has been fed completely, the rollers will
turn in the opposite direction and scanning of the card will start.
The scanned card will be ejected from the front card slot.
CAUTION
• The card slot is disabled when documents are placed on the feed
tray. When you want to insert a card in the card slot, remove any
documents from the feed tray.
• During scanning, a portion of the card will protrude from the rear
card slot at the rear of the scanner. Keep the area in front of the rear
card slot clear of objects.