Filter
Top Products
CONTENTS
GLOSSARY
INDEX
28
28
Chapter 3
Scanning
Selecting a Custom Resolution
ScanGear CS-S has a range of preset resolutions based on your chosen output
device. Using Custom Resolutions, you can also create a new customized
resolution, change an existing resolution, or delete a previously defined
custom resolution.
To set a custom scan resolution:
1. On the Main tab, select Custom... from the Scan Resolution list. The
Custom Resolutions dialog box appears.
2. Enter the name for the resolution.
3. In the Resolution box, select a resolution or type a new one.
4. Click Add.
5. Click OK. The new resolution name is added to the Resolution list.
Deleting a Custom Resolution
When you no longer need to use a custom resolution, you can delete it from
the list.
To delete a custom resolution:
1. On the Main tab, select Custom... from the Scan Resolution list.
2. In the Custom Resolution dialog box, select a name.
3. Click Remove.
Note: You cannot remove or replace the preset resolution settings.
If you select a preset resolution, the Remove and Replace
buttons are unavailable.