Filter
Top Products
CONTENTS
GLOSSARY
INDEX
76
76
Chapter 6
Using ScanGear Toolbox CS-S
4. Select an Image Quality.
5. Click OK.
Showing the Fax Button on the ScanGear Toolbox CS Bar
Select Show This Button to display the Fax button on the Toolbox bar. If this
check box is cleared, the button does not display.
Note: If no application .exe has been linked using the previous
procedure, the Show This Button option is disabled.
Faxing Acquired Images
You can send an acquired image directly to a fax.
To scan and fax an image with Easy Acquire selected:
1. Select the Easy Acquire check box.
2. Click the Fax button on the ScanGear Toolbox CS bar.
ScanGear Toolbox acquires all the images and displays a progress bar.
The acquired images are sent to the current Fax driver or Fax application.
Note: If an automatic document feeder is attached to the scanner,
all the images in the feeder are acquired and sent to the fax
application.
To scan and fax an image with Easy Acquire cleared:
1. Clear the Easy Acquire check box.
2. Click the Fax button on the ScanGear Toolbox CS bar. The ScanGear CS-S
window appears.
3. Optionally, click Preview to preview the images and make any changes
before scanning.
4. Click Scan. The image is sent to the Fax application, ready to send.