Filter
Top Products
Setting Up the Network
148
■Setting Up Email [Mail]
From [Mail] in the settings window, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to “Displaying and Configuring
the Network Configuration Screen” (P142).
Item Explanation Factory default setting
To: Enter the recipient address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters).
MailUserAccount
Cc: Enter the CC address for error mails
in 1-byte alphanumeric characters
and symbols (1 - 63 characters).
<Blank>
From: Enter the sender address for error
mails in 1-byte alphanumeric char-
acters and symbols (1 - 63 charac-
ters).
Projector@canon.co.jp
SMTP server IP address Enter the SMTP server IP address in
1-byte numbers.
0.0.0.0
SMTP server port number Enter the SMTP server port number
in 1-byte numbers (1 - 65535).
25
SNTP server IP address Enter the SNTP server IP address in
1-byte numbers.
0.0.0.0
Time zone Select the time zone where the pro-
jector is used.
(GMT) Dublin, Lisbon,
London
Mail resend interval Enter the interval for resending mail
when an error occurred (units: sec-
onds) within the range of 0 - 59 sec-
onds using 1-byte numbers.
10
Mail resend times Enter the number of times to resend
mail when an error occurred within
the range of 0 - 255 using 1-byte
numbers.
3
Error report Select whether to turn the error mail
sending function on or off.
OFF