Canon WUX5000 Projector User Manual


 
87
Setting Display Status
User’s Manual Settin
g
Functions from Menus
Selecting a Logo at Star-
tup
[User screen settings] - [Projector on]
You can display a specified logo on the
screen from the moment the projector is
turned on to the moment it is ready for pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
[Canon logo] is the factory default.
Selecting Aspect Ratio of
Screen
[Screen aspect]
Select according to the aspect ratio of the
projection screen. (P52)
Press the OK button to accept your setting
and then press the MENU button.
[16:10] is the factory default.
If you select [16:9 D. image shift] or [4:3 D.
image shift], the keystone correction will
be canceled. For more details, refer to
page 53.
[Auto] may be automatically selected for
the aspect depending on the screen
aspect setting.
HDMI Component
Digital PC Analog PC
Skip Projects an input signal
immediately after turning on
the projector.
Canon logo
Displays the Canon logo that
was registered in advance at
the factory.
Display settings
User screen settings
Projector on
HDMI Component
Digital PC Analog PC
16:10 Select this when you use a screen
with an aspect ratio of 16:10.
16:9 Select this when you use a screen
with an aspect ratio of 16:9.
4:3 Select this when you use a screen
with an aspect ratio of 4:3.
16:9
D.
image
shift
Select this when you use a screen
with an aspect ratio of 16:9.
You can move the screen upward
or downward with the D.SHIFT/
KEYSTONE button.
4:3
D.
image
shift
Select this when you use a screen
with an aspect ratio of 4:3.
You can move the screen to the
left or right with the D.SHIFT/KEY-
STONE button.
Display settings
Screen aspect