Filter
Top Products
Adjusting the Image
60
Adjusting the Image Position
To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the
remote control or the LENS button on the projector. This function is referred to as “lens
shift” because the position of the projected image is changed by moving the lens posi-
tion. (P126)
1 Press either the LENS-SHIFT button on the remote control or the LENS button on the
projector 3 times in order to display the window shown on the lower right.
2 Press the pointer buttons to adjust.
3 When the desired position is reached, press the OK button.
• The available range for lens shift (percentage of movement relative to the screen size) var-
ies depending on the lens unit which is used. (P127)
Standard Zoom Lens (RS-IL01ST): Down 15% - Up 55%, Left 10% - Right 10%
Long Zoom Lens (RS-IL02LZ): Down 15% - Up 55%, Left 10% - Right 10%
Short Fixed Lens (RS-IL03WF): Down 5% - Up 5%, Left 2% - Right 2%
• There are areas where each lens is unable to move. With the Standard Zoom Lens and the
Long Zoom Lens, the areas are at the top left and top edges. With the Short Fixed Lens,
the areas are at the four corners. (P127)
Push three times
Remote control
Projector
Remote control
Projector
Screen