Filter
Top Products
Menu Configuration
186
Image Adjustment Menu
*: Factory default settings (after reset)
Factory default settings for *1, *2 and *3 are set accord-
ing to the following conditions.
*1: • For Analog PC, Digital PC or HDMI (when [HDMI
In] is [Computer]), the factory default is [Off].
• For Component, and HDMI (when [HDMI In] is
[Auto]), the factory default is [On].
*2: • For HDMI (when [HDMI In] is [Auto]), the factory
default is [Off].
• For Component, the factory default is [Weak].
*3: • For HDMI (when [HDMI In] is [Computer]), Digi-
tal PC or Analog PC, if any image mode is used
except [VividPhoto], the factory default is [Off].
If [VividPhoto] is used, the factory default is
[Middle].
• For HDMI (when [HDMI In] is [Auto]) or Compo-
nent, the factory default is [Weak], regardless of
the image mode.
Image mode
COMMON
P88
Standard *
Photo/sRGB
User 1 - 5 (as creating
profile)
Digital PC / Analog PC
P88
Presentation
VividPhoto
Component / HDMI P88
Dynamic
Video
Cinema
Create Profile
P89
Baseline Image
Mode (when user
memory is selected)
P89
Brightness
P90
Contrast
P90
Sharpness
P91
Gamma
P91
Color adjustment P92
Color level
Color balance
Color temperature
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Advanced adjustment
Ambient light Off * P93
Adjust
Type Tungsten
Fluorescent
Fluores-
cent H
Level L
M
H
Return
Noise reduction *2 Component / HDMI
P94
Off
Weak
Middle
Strong
Dynamic gamma Off *1
P94
Weak *2
Middle
Strong
Mem. color correct *3
Off
P95
L
M
H
6-axis color adjust Off *
P95
Adjust
Hue / Saturation /
Brightness
Reset
Fine-Tune Gamma P96
Return
Lamp mode Normal *
P97
Quiet
Reset OK / Cancel
P97