Filter
Top Products
97
Selecting an Image Quality
User’s Manual Settin
g
Functions from Menus
Reducing the Lamp
Brightness
[Lamp mode]
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
You can also enable or disable this mode
with the LAMP button on the remote con-
trol.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
Resetting the Image Set-
tings
[Reset]
You can reset the current image settings to
the default settings. If reset is performed
when user setting 1 - 5 is selected for
[Image mode], the settings are returned to
the settings that were saved in [User set-
ting 1 - 5].
Press the OK button to accept your setting
and then press the MENU button.
• Only the setting for the combination of
input signal and image mode for the cur-
rent projection is reset.
HDMI Component
Digital PC Analog PC
Normal Projects an image at the normal
brightness level.
Quiet Reduces the lamp brightness and
cooling fan noise.
Image adjustment
Lamp mode
HDMI Component
Digital PC Analog PC
OK
Resets the image settings.
Cancel Cancels resetting of the image
settings.
Image adjustment
Reset