Filter
Top Products
74
How to Use Menus
Use the menus to set the operation of the projector in detail.
■Menu Configuration
The menu screen is divided into 5 tabs as shown below.
Input Signal Types for which a Menu Item is Displayed
Different menu items are displayed for different input signal types.
In the following explanation of each menu item, the input signal type for which the
menu item is displayed is indicated as follows:
Contents of menu
Menu items
HDMI Component
Digital PC Analog PC
Input signal for which the
menu item is displayed
Input signal for which the
menu item is not displayed
[Display settings] tab
(P77)
You can set the type of signal
or the method of projection of
the images input.
[
System settings] tab (P98
)
You can set the operation of the projector.
[Image adjustment] tab
(P88)
You can adjust the image quality
and colors according to your
preference.
[Network Setting] tab (P137)
These settings are for when using the
projector from a PC via a network.
For the network settings, refer to “Con-
necting to a Network” (P131).
[Information] tab (P110)
You can check information about the
signal types of the images projected
and other projector-specific informa-
tion.