Filter
Top Products
E
12
Initializing Printer Memory
You should initialize the memory of the printer before using it for the first time,
after you have not used it for a long time, or if it fails to operate normally when
you turn power on.
Important!
Initializing printer memory clears its memory of all input data.
To initialize printer memory
1. Make sure that the printer is turned off.
2. While holding down the PRINT and ESC keys, press . Release
first, but keep PRINT and ESC depressed until power turns on and a con-
firmation message appears on the display.
3. In response to the confirmation message that appears, press SET to ini-
tialize the printer memory or ESC to abort.
Data Error
Whenever you turn on the printer, it performs an internal check of its memory
and functions. If it finds a serious data problem, it will display the following
message:
DATA ERROR! INITIALIZE THE PRINTER!
When this message appears, press any key. Next, in response to the “INI-
TIALIZE? SET/ESC” message that appears, press SET to initialize printer
memory (which deletes everything in memory) or ESC to clear the message
without initializing.
Powering Up and Selecting a Printing Mode
Tu rning the printer on and off is as simple as pressing a button. After the
printer powers up, you will need to select the type of operation you want to
perform.
To turn power on and off
1. Press the button to turn the printer on.
• This turns on power and displays a main menu screen like the one shown
below.
• The selection boundary indicates the icon that is currently selected on
the main menu.
New data icon
Last Data icon
Selection boundary
Currently selected function (icon)
Stored data icon
Shows the function of the
currently selected icon