Filter
Top Products
49
E
Error Messages
Message
See page:
Cause and Action
Message
See page:
Cause and Action
DATA ERROR!
INITIALIZE THE
PRINTER!
ENTIRE PHRASE
COULD NOT BE
RECALLED!
LINK ERROR!
CHECK ALL
CONNECTIONS!
• You are trying to operate the
printer without initializing its
memory first.
• You unplugged the AC adaptor
or removed the batteries
before the printer was turned
off completely.
➜
Press SET and then initialize
printer memory.
• The text in the phrase
memory you are trying to
recall will cause the number
of characters to exceed the
allowable limit for the location
where you are inserting it.
➜
Re-input so the recalled
phrase memory text does not
cause the allowable number
of characters to be exceeded.
• The USB cable is not
connected securely to the
USB port.
➜
Plug the USB cable securely
into the USB port.
• The computer is shut down.
➜
Start up the computer.
12
37
Read this
first
LOW BATTERY!
LOW BATTERY!
CONTINUE TO
PRINT?
SET/ESC
MEMORY FULL!
• Battery power is low.
➜
Replace the batteries or use
the AC adaptor to power the
printer.
• Temperature is below 10˚C
(50˚F)
➜
Move the printer to a location
where the temperature is
within the operating
temperature range (10˚C to
35˚C (50˚F to 95˚F)).
• Battery power is low.
➜
Replace the batteries or use
the AC adaptor to power the
printer.
• Temperature is below 10˚C
(50˚F)
➜
Move the printer to a location
where the temperature is
within the operating
temperature range (10˚C to
35˚C (50˚F to 95˚F)).
• There is not enough memory
available to save the data you
are trying to save.
➜
Delete memory data you no
longer need and try again.
10
10
44