Filter
Top Products
E
48
Symptom
I can't get a
connection
between
the printer
and a
computer.
The printing
operation is
finished
normally,
but nothing
is printed.
The printed
color is
different
from the ink
ribbon
color.
Recommended Action
Press the COMPUTER LINK
button to establish a connec-
tion.
Re-connect the cable properly.
Press to turn on the
printer.
Unplug the USB cable and the
plug it back in again.
Tr y using a different USB port
on your computer, or try using
a different USB cable.
Load a new ink ribbon
cassette (option). (page 15)
Tr y using a lighter color disc or
a darker color ink ribbon.
Possible Cause
The COMPUTER
LINK button has not
been pressed.
The USB cabled is not
connected properly.
The printer is turned
off.
The USB driver is not
installed correctly.
Though the USB driver
is installed correctly,
data communication is
not possible for some
reason.
The ink ribbon is used
up.
The color of the final
printout is affected by
both the color of the
ink ribbon and the
color of the disc you
are printing on.
Symptom Recommended ActionPossible Cause
Improper alignment of
the disc when it is
placed in the printer.
The power cord plug
or the AC adaptor is
not plugged in as far
as it will go.
The printer is
malfunctioning.
Battery power is low or
the wrong type of
batteries are loaded in
the printer.
Use the positioning guide
when aligning the disc. (page
22)
Correctly connect the power
cord and the AC adaptor.
(page 9)
If you cannot easily remove
the disc from between the
print head and roller, Remove
the disc from the printer as
shown on page 8.
Use the AC adaptor to power
the printer, or replace the
current batteries with a fresh
set of AA-size alkaline
batteries.
The cassette cover is
not closed properly.
The disc is not
positioned correctly in
the printer.
Close the cassette cover
properly and insert the disc.
(page 9)
Remove the disc and then re-
insert it straight into the left
side of the slit along the top of
the printer. (page 21)
The printing
is not
positioned
correctly on
the disc.
The disc
stops part
way
through
printing.
I cannot
insert a
disc into
the printer.
Printing will
not start.