Filter
Top Products
47
E
Clean the print head.
(page 46)
Change to AC adaptor power
or load a fresh set of batteries
(supplied by you). (page 10)
Adjust the print density. (page
45)
Use a disc that meets the
requirements described in the
bundled “Printing Precautions”
or at the following Internet
URL.
http://world.casio.com/ds/
media/
You can also try adjusting the
print density to make it darker.
(page 45)
Re-load the ink ribbon
cassette properly.
Change to AC adaptor power
or load a fresh set of AA-size
alkaline batteries (supplied by
you). (page 10)
Press ESC to cancel the
FUNCTION key operation.
The print head is dirty.
Battery power is low.
Improper print density
Any of the following
can interfere with
proper printing.
• A disc printing
surface that is not
smooth and flat
• A disc printing
surface that has a
design or lines
printed on it
• A disc printing
surface that
supports ink jet
printing only
The ink ribbon
cassette is not loaded
properly.
Battery power is low or
the wrong type of
batteries are loaded in
the printer.
The FUNCTION key
has been pressed.
Troubleshooting
Consult the troubleshooting tables below whenever you start to have prob-
lems with the printer or application. If you can't find the solution to your prob-
lem below, contact your original retailer or your nearest authorized CASIO
service center.
Symptom
Nothing
appears on
the display
when I
press .
Recommended Action
Adjust the display contrast
setting. (page 45)
Make sure the AC adaptor is
properly connected. (page 9)
Change to AC adaptor power
or replace the current
batteries with a fresh set of
AA-size alkaline batteries
(supplied by you). (page 10)
Reload the batteries properly.
(page 10)
Input the text you want to
print.
Re-import the data.
Possible Cause
The display contrast
setting needs
adjustment.
The AC adaptor is not
connected properly.
Battery power is low or
the wrong type of
batteries are loaded in
the printer.
Batteries are not
loaded properly.
Only spaces are input
for the label.
The file imported from
a computer does not
contain any data.
The printing
operation is
finished
normally,
but nothing
is printed.
Symptom Recommended ActionPossible Cause
Printing is
not clear.
Printing is
poor
quality.
Printing is
too light.
Cannot
print.
I can't input
text.