Filter
Top Products
1-3
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
OL-13838-03
Chapter 1 SIP and SPA Product Overview
Modular Optics Compatibility
Modular Optics Compatibility
Some SPAs implement small form-factor pluggable (SFP or XFP) optical transceivers to provide network
connectivity. The SFP and XFP modules are fiber-optic transceiver devices that mount to the front panel to
provide network connectivity.
Note SFP modules are optics modules with speeds lower than 10 gigabits per second (Gb/s); XFP modules are
optics modules with speeds equal to or greater than 10 Gb/s.
Cisco Systems qualifies the SFP modules that can be used with SPAs.
Note The SPAs accept only the optics modules listed as supported in this document. Each time an SFP or XFP
module is inserted into a SPA, a check is run. Only SFP and XFP modules that pass this check are usable.
Table 1-2 shows the types of optics modules that are qualified for use with a SPA.
Table 1-1 SIP and SPA Compatibility
SPA Product ID SIP-600
Minimum Cisco IOS
Software Release
1-port 10-Gigabit Ethernet SPA SPA-1X10GE-L-V2 Yes 12.2(33)SB
2-port Gigabit Ethernet SPA SPA-2X1GE-V2 Yes 12.2(33)SB
5-port Gigabit Ethernet SPA SPA-5X1GE-V2 Yes 12.2(33)SB
8-port Gigabit Ethernet SPA SPA-8X1GE-V2 Yes 12.2(33)SB2
Table 1-2 SPA Optics Compatibility
SPA Qualified Optics Modules—Cisco Part Numbers
1-port 10-Gigabit Ethernet SPA • XFP-10GLR-OC192SR
• XFP-10GER-OC192IR
2-port Gigabit Ethernet SPA • SFP-GE-T
1
• SFP-GE-S
• SFP-GE-L
• SFP-GE-Z