Filter
Top Products
3-7
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
OL-13838-03
Chapter 3 Cisco 10000 Series Router Shared Port Adapters
2-Port Gigabit Ethernet SPA Overview
XFP Port Cabling Specifications
Table 3-4 shows the port cabling specifications for an XFP module.
2-Port Gigabit Ethernet SPA Overview
The following sections describe the 2-Port Gigabit Ethernet SPA:
• 2-Port Gigabit Ethernet SPA LEDs, page 3-7
• SFP Module Cabling and Connection Equipment, page 3-10
2-Port Gigabit Ethernet SPA LEDs
The 2-Port Gigabit Ethernet SPA has two types of LEDs. There is an A/L LED for each port and. one
STATUS LED as shown in
Figure 3-5.
Figure 3-5 2-Port Gigabit Ethernet SPA Faceplate
The 2-Port Gigabit Ethernet SPA LEDs are described in Table 3-5.
RX overload XFP-10GLR-OC192SR: 0.5 dBm
XFP-10GER-OC192IR: –1.0 dBm
Maximum receiver power damage XFP-10GLR-OC192SR: +5 dBm
XFP-10GER-OC192IR: +5 dBm
Table 3-3 XFP Module Specifications for 10-Gigabit Ethernet SPA (continued)
Specification Description
Table 3-4 XFP Port Cabling Specifications
XFP Module Wavelength Fiber Type
XFP-10GLR-OC192SR 1310 nm SMF
XFP-10GER-OC192IR 1550 nm SMF
1 A/L LED (for each interface) 2 STATUS LED (for entire SPA)
3 Two RJ45 (copper) ports
STATU
S
0
1
A/L
A/L
SPA-2X1GE
0
1
A/L
A/L
138041
2
1 3