2-6
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
OL-13838-03
Chapter 2 Cisco 10000 Series Router SPA Interface Processor-600
Cisco 10000 SIP-600 Overview
• slot—Specifies the chassis slot number where the SIP is installed.
• subslot—Specifies the secondary slot of the SIP where the SPA is installed.
• port—Specifies the interface number that you want to select on the SPA.
To display information about a SPA, use the show diag, show hw-module sublsot, and show inventory
commands. For more information about SPA commands, refer to the Cisco
10000 Series Router SIP and
SPA Software Configuration Guide.
Cisco 10000 SIP-600 Overview
The following sections describe the Cisco 10000 SIP-600:
• Cisco 10000 SIP-600 Processor, page 2-6
• Cisco 10000 SIP-600 LED, page 2-6
• Cisco 10000 SIP-600 Physical Specifications, page 2-8
Cisco 10000 SIP-600 Processor
Table 2-2 describes the processor on a Cisco 10000 SIP-600.
Cisco 10000 SIP-600 LED
The Cisco 10000 SIP-600 has one LED (Figure 2-2).
Table 2-2 Cisco 10000 SIP-600 Processor
Type Speed Description
CPU 800 megahertz (MHz) internal operating
frequency
Power QUICC III integrated
communications processor