Filter
Top Products
viii
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
OL-13838-03
About This Guide
Document Revision History
Document Revision History
Table 1 records technical changes to this document.
Organization
This document contains the following sections:
Related Documentation
The related information listed below is available online.
• Cisco 10000 Series Router SIP and SPA Software Configuration Guide
• Cisco IOS software:
Table 1 Document Revision History
Cisco IOS
Release
Revision Date Change Summary
12.2(33)SB OL-13838-01 April 2008 First release.
12.2(33)SB2 OL-13838-03 September 2008 Introduced the following new hardware
on the Cisco
10000 series router for the
PRE4.
• 8-port Gigabit Ethernet Shared Port
Adapter (SPA).
Chapter Title Description
1 SIP and SPA Product Overview Provides an introduction to the SPA interface
processor (SIP) and shared port adapters (SPAs).
2 Cisco 10000 Series Router SPA
Interface Processor-600
Provides a SIP and SPA compatibility summary.
For each supported SIP, provides a summary of
SIP characteristics.
3 Cisco 10000 Series Router Shared
Port Adapters
Provides a summary of SPA characteristics for
each supported SPA.
4 Preparing to Install a SIP or a SPA Describes the required tools, equipment, and
safety guidelines for installing SIPs and SPAs.
5 Installing and Removing a SIP Describes the procedures for installing and
removing a SIP on a Cisco 10000 series router.
6 Installing and Removing a SPA Describes the procedures for installing and
removing a SPA on a Cisco 10000 series router. It
also describes how to verify the SIP and SPA
installation.
7 Troubleshooting the Installation Provides information for troubleshooting the
installation of SIPs and SPAs. It also lists helpful
debug commands and error messages.