Filter
Top Products
12-13
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-03
Chapter 12 Configuring Port-Based Traffic Control
Displaying Port-Based Traffic Control Settings
This is an example of output from the show storm-control command when no keywords are entered.
Because no traffic type keyword was entered, the broadcast storm control settings are displayed.
Switch# show storm-control
Interface Filter State Level Current
--------- ------------- ------- -------
Fa0/1 inactive 100.00% N/A
Fa0/2 inactive 100.00% N/A
Fa0/3 inactive 100.00% N/A
Fa0/4 inactive 100.00% N/A
Fa0/5 inactive 100.00% N/A
Fa0/6 inactive 100.00% N/A
Fa0/7 Forwarding 50.00% 0.00%
Fa0/8 inactive 100.00% N/A
<output truncated>
This is an example of output from the show storm-control command for a specified interface. Because
no traffic type keyword was entered, the broadcast storm control settings are displayed.
Switch# show storm-control fastethernet0/17
Interface Filter State Level Current
--------- ------------- ------- -------
Fa0/17 Forwarding 50.00% 0.00%
This is an example of output from the show storm-control command for a specified interface and traffic
type, where no storm control threshold has been set for that traffic type on the specified interface.
Switch# show storm-control fastethernet0/17 multicast
Interface Filter State Level Current
--------- ------------- ------- -------
Fa0/17 inactive 100.00% N/A