Filter
Top Products
24 7000 Series Route Switch Processor (RSP7000) Installation and Configuration in the Cisco 7000 Series Routers
Troubleshooting the Installation
The slot 0 and slot 1 LEDs indicate which PCMCIA (Flash memory) card slot is in use, and each
LED blinks when the card is accessed by the system.
Note The RSP7000 is oriented horizontally in the Cisco 7010 router.
Caution The reset switch (see Figure 5) resets the RSP7000 and the entire system. To prevent
system errors and problems, use it only at the direction of your service representative.
Figure 5 RSP7000 LEDs, Cisco 7000 Orientation Shown
NORMAL
RESET
CPU HALT
H5378
EJECT
SLOT 1
SLOT 0