Filter
Top Products
4-26
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Chapter 4 Performing Administrative Tasks
Logging for EAP Modules
Logging for EAP Modules
To generate logs to assist with troubleshooting, the EAP-FAST, LEAP, and PEAP-GTC modules utilize
Windows Event Log Service. The logs include information such as the type of event, the event location,
the function that was affected by the event, and the date and time of the event.
The following sections contain information about logging:
• Configuring and Starting Logging, page 4-26
• Disabling Logging and Flushing Internal Buffers, page 4-27
• Locating Log Files, page 4-28
Configuring and Starting Logging
To access the administrator command prompt and to configure and start logging, perform the following
steps:
Step 1 Choose Start > All Programs > Accessories.
Step 2 Right-click Command Prompt and select Run as administrator.
Step 3 At the prompt, enter the following command to configure and start logging:
• For EAP-FAST
wevtutil sl Cisco-EAP-FAST/Debug /e:true /k:category_mask /l:log_level
• For PEAP-GTC
wevtutil sl Cisco-EAP-PEAP/Debug /e:true /k:category_mask /l:log_level
• For LEAP
wevtutil sl Cisco-EAP-LEAP/Debug /e:true /k:category_mask /l:log_level