Filter
Top Products
4-28
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Chapter 4 Performing Administrative Tasks
Logging for EAP Modules
Locating Log Files
By default, an .etl file that you can use for analysis and debugging are created at this location:
C:\Windows\System32\Winevt\Logs\Cisco-EAP-FAST%4Debug.etl
If you would like to change this location, enter this command at the administator prompt:
• For EAP-FAST
wevtutil sl Cisco-EAP-FAST/Debug /lfn:“path_to_etl_log_file”
• For PEAP-GTC
wevtutil sl Cisco-EAP-PEAP/Debug /lfn:“path_to_etl_log_file”
• For LEAP
wevtutil sl Cisco-EAP-LEAP/Debug /lfn:“path_to_etl_log_file”
Note Logging must not be running when you enter the command to change the path to the log file.
You can also change the path to the .etl file when you start logging. To start logging and specify the
location of the .etl file, enter this command at the administrator prompt:
• For EAP-FAST
wevtutil sl Cisco-EAP-FAST/Debug /e:true /lfn:“path_to_etl_log_file”
• For PEAP-GTC
wevtutil sl Cisco-EAP-PEAP/Debug /e:true /lfn:“path_to_etl_log_file”
• For LEAP
wevtutil sl Cisco-EAP-LEAP/Debug /e:true /lfn:“path_to_etl_log_file”