Filter
Top Products
A-8
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Appendix A EAP Messages
PEAP-GTC and LEAP Error Messages and Prompts
Error Message The operation was canceled by the user.
Recommended Action Contact your network administrator for further assistance.
Error Message The authentication failed because Windows does not have the
authentication method required for this network.
Recommended Action Contact your network administrator for further assistance.
Error Message Windows cannot connect to this network.
The user credentials were rejected by the server.
Recommended Action Contact your network administrator for further assistance.
Error Message Windows cannot connect to this network.
There is a problem with the certificate on the server required for authentication.
Recommended Action Contact your network administrator for further assistance.
Error Message Windows cannot connect to “<network-name>”
Wireless authentication failed.
Recommended Action Contact your network administrator for assistance with the specified network.
Error Message The authentication failed because of unknown reason. The error
condition was reported by cryptographic subsystem.
Recommended Action Contact your network administrator for further assistance.
Error Message The network device failed to authenticate itself.
The failure can indicate an attack on your password.
Recommended Action Use a strong password to reduce the risk of compromising your password. For
more information about creating a strong password, see the
“Creating Strong Passwords” section on
page A-9. If the authentication attempt fails again, contact your system administrator to report a
rogue access device.