Filter
Top Products
1-13
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Chapter 1 Product Overview and Installation
Inserting the Client Adapter
Figure 1-5 Inserting a PCI Card into a PC
Step 6 Tilt the card to enable the LEDs to slip through the opening in the CPU back panel. See the enlarged
view in
Figure 1-5.
Step 7 Press the card into the empty slot until its connector is firmly seated.
Caution Do not force the card into the expansion slot; this could damage both the card and the slot. If the card
does not insert easily, remove it and reinsert it.
Step 8 Reinstall the screw on the CPU back panel and replace the computer cover.
Assembling the Antenna
Follow the steps below to assemble the PCI card’s antenna.
Step 1 Slide the antenna through the opening in the bottom of the antenna base.
Step 2 Position the antenna so its notches are facing the Cisco label on the front of the base. See Figure 1-6.
STATUS
ACTIVITY
95582
STATUS
ACTIVITY
2
1
3
1
Antenna cable
2
LEDs
3
Card edge connector