Cisco Systems CB21AG Network Card User Manual


 
D-2
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
Appendix D Declarations of Conformity and Regulatory Information
Manufacturer’s Federal Communication Commission Declaration of Conformity Statement
Manufacturer’s Federal Communication Commission
Declaration of Conformity Statement
Models: AIR-CB21AG-A-K9, AIR-PI21AG-A-K9
FCC Certification Number: LDK102050 (CB21AG)
LDK102051 (PI21AG)
Manufacturer: Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
This device complies with Part 15 rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
The CB21AG client adapter has been tested and complies with FCC RF Exposure (SAR) limits in typical
laptop computer configurations, and this device can be used in laptop computers with side-mounted
PCMCIA slots which can provide 0.394 in (1 cm) separation distance from the antenna to the body of
the user or a nearby person. Thin laptop computers may need special attention to maintain antenna
spacing while operating.
The PI21AG client adapter has been tested and complies with FCC RF Exposure (SAR) limits in typical
desktop computer configurations. A separation distance of 7.9 in (20 cm) must be maintained between
this device’s antenna and the body of the user or a nearby person.
These devices cannot be used with handheld personal digital assistants (PDAs). Use in other
configurations may not ensure compliance with FCC RF exposure guidelines. These devices and their
antennas must not be co-located or operated in conjunction with any other antenna or transmitter.
Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this
frequency when using integrated antennas. Any changes or modification to the product not expressly
approved by Cisco could void the user’s authority to operate this device.
Caution Within the 5.15-to-5.25-GHz band, UNII devices are restricted to indoor operations to reduce any
potential for harmful interference to co-channel Mobile Satellite Systems (MSS) operations.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE