Filter
Top Products
CF2001P
– 12 –
4004-7715-01
5. Load the prepared A4(C)-size (or Letter(C)-
size) plain paper into the paper drawer.
6. Slide the adjustable paper guides against
the edges of the paper.
NOTE
Check that the adjustable paper guides are
pushed up against the edges of the paper.
7. Close the paper drawer.
8. Make sure that the media type selection dial
on the drawer is turned to the setting for
plain paper.
9. From the control panel, select the size of the
test paper loaded into Tray 1.
NOTE
For details on specifying settings, refer to
the User Manual.
■ Setting Up the Servicing Equipment
Set up the equipment in order to print a test pattern and make the necessary adjustments.
NOTE
Do not turn on any equipment until you are instructed to do so.
(1) Notebook PC
Starts the External Panel Controller for adjustment.
(2) X-Rite (DTP32)
Color Tone Tester
(3) Selector
Switches between the Notebook PC and the X-Rite, CF2001P
(4) DTP32 cable
Connects between the X-Rite and the connector A of the selector
(5) RS232 straight cable
Connects between COM1 port of the Notebook PC and the connector C of the selector
(6) RS232 straight cable
Connects between the converter and the connector B of the selector
(7) Converter
Converts the RS422 connector to the RS232 connector
(8) IR Port cable
Connects between the CF2001P and the converter
C4004U074AA
C4004U170AA
C4004U075CA
CF2001P
(2)
(8)
(4)
(5)
(1)
(6)
(7)
(3)
NEXTNEXT