Filter
Top Products
CF2001P
– 17 –
4004-7715-01
11. Insert the auto-cal strip into the X-Rite.
NOTE
Insert the auto-cal strip after “INSERT CAL
STRIP” appears on the X-Rite display.
12. Check that the dialog box appears.
NOTE
The dialog box appears if the auto-cal strip
was read correctly.
13. Prepare the cyan test pattern, set the X-Rite
guide to “10”, and then feed the pattern in
direction “1” to read the row represented by
“A”.
Align the test pattern with the guide, and insert
the pattern into the X-Rite.
* The arrows indicate the direction that the
pattern should be fed into the X-Rite.
14. Check that the area indicated in the dialog
box appears in [OK].
NOTE
The area indicated appears in [OK] if the
pattern was read correctly.
C4004U574AA
Reading . . .
CALIBRATION OK
MANU
0.080.08 0.06
C4004U594CA
C4004P575CA
1
2
3
4
A
B
C
D
C4004U577AA
C4004U576AA
Guide
C4004P578CA
NEXTNEXT