Filter
Top Products
CF2001P
– 30 –
4004-7715-01
4. Click [PRT Area].
5. Click [Left Margin].
6. Select the key for the paper drawer that is to
be adjusted, and then click the Start key in
the External Panel Controller.
A test page is printed.
7. Measure margin a from the edge of the
paper to the pattern printed in the test page,
and then check that the width of the mea-
sured margin meets its standard width.
Standard width of the margin (a):
3.0 mm ± 1.0 mm (with Fiery X3e installed)
5.0 mm ± 1.0 mm (with MicroPress PrintLink
2020m installed)
If the width of the measured margin does not
meet its standard width, follow the procedure
in the next section, “Adjusting the Paper Ref-
erence Position for PF-118”, to adjust it.
C4004P588CA
C4658P003CA
C4658P005CA
C4658U028AA
a
NEXTNEXT