Filter
Top Products
CF2001P
– 13 –
4004-7715-01
■
Setting Up the Converter (7)
1. Remove the converter from its box.
2. Remove the screw at the bottom of the con-
verter, and then remove the upper cover.
3. Set the TERM switch (S2) to ON as shown in
the illustration.
NOTE
• Set the button on the converter to “Nor-
mal”.
• In order to reduce the risk of damage to
the circuit board due to static electricity,
do not touch the circuit board pattern.
• Do not change the setting of any
switches other than those specified.
■ Setting Up the Selector (3)
1. Remove the selector from its box.
2. Remove the two screws from the selector,
and then remove the upper cover.
3. Affix aluminum tape to the converter as
shown in the illustration.
C4004U556AA
C4004U557AA
O
N
1
S2
TERM
C4004U558AA
C4004U601AA
C4004U602AA
C4004U603AA
Aluminum tape
NEXTNEXT