Filter
Top Products
CF2001P
– 42 –
4004-7715-01
<Initial Transmission>
• To perform the initial user registration for the data terminal after the initial settings
have been specified, connect to the Center so the initial information can be sent to
the data terminal.
NOTE
Call the Center by telephone before and after the initial transmission for verification. In
addition, after the transmission, check that the data (total counters, etc.) has been
sent correctly to the Center.
1. Click [Initial Transmission].
2. After the initial transmission is completed,
check that “End normal.” appears on the
screen.
3. Click the Panel Reset key in the External
Panel Controller.
4. Click [Fin. Time].
NOTE
This completes input of the Maintenance
Center settings. If the Billing Center settings
must be specified, perform it in the same
way.
C4656P010CA
C4656P018CA
Messages
Line is busy. Not answering.
Max. trial number reached. The other line is busy.
Connection failed. DT modem error.
Connected. Dialing.
End normal. DT Connection failed.
4002U103EA
C4004P566CA
C4656P019CA
RETURN