Filter
Top Products
CF2001P
– 31 –
4004-7715-01
■
Adjusting the Paper Reference Position for PF-118
1. Check that the External Panel Controller
appears in the computer screen, and then
display the Tech. Rep. Mode screen. (For
details about displaying the Tech. Rep. Mode
screen, refer to the Service Manual.)
2. Click [Machine Adjust].
3. Click [PRT Area].
4. Click [Left Margin].
5. Select the paper drawer that you wish to
adjust, and then click the up and down
arrows in the lower-right corner of the screen
to enter the difference between the mea-
sured width and the standard width.
6. Print a test page and check the paper refer-
ence position.
If the width of the measure margin does not
meet its standard width, follow the instruc-
tions described below.
7. Open the paper drawer for the cassette that
needs to be adjusted, and then remove all of
the paper.
8. Loosen the two screws on the guide plate at
the bottom of the paper drawer.
9. Adjust the guide plate to the appropriate
position on the scale inside the paper
drawer.
C4004P565CA
C4004P597CA
C4004P588CA
C4658P003CA
C4658O005CA
C4658U024AA
C4658U025AA
NEXTNEXT