Filter
Top Products
CF2001P
– 39 –
4004-7715-01
<Maintenance Center (Billing Center) Settings>
NOTE
The procedure for making Maintenance Center settings are described below. If Billing
Center settings are necessary, specify them using the same procedure after entering
the Maintenance Center settings.
<Clearing the Maintenance RAM>
1. Click [Maintenance].
(For the Billing Center, click [Billing].)
2. Click [ID Code] so that it appears in white on
a black background.
NOTE
For the Billing Center, there is no need to
enter an ID code.
3. Using the keypad in the External Panel
Controller, enter the 7-digit ID code.
NOTE
Enter the service representative’s ID code.
4. Click [ID Code] again so that it appears in
black on a white background.
5. Click [RAM Clear].
6. Click [Yes].
7. Click [END].
C4656P003CA
C4656P008CA
C4656P009CA
C4656P010CA
C4656P011CA
NEXTNEXT