Filter
Top Products
CF2001P
– 40 –
4004-7715-01
<DT Settings>
1. Click [ID Code] so that it appears in white on
a black background.
2. Using the keypad in the External Panel
Controller, enter the 7-digit ID code.
NOTE
Enter the service representative’s ID code.
3. Click [ID Code] again so that it appears in
black on a white background.
4. Click [DT Setting].
5. Click [Password] so that it appears in white
on a black background.
6. Using the keypad in the External Panel
Controller, enter the 4-digit Center ID.
Password: Center ID code; identification
number of the Center that the
data terminal connects to
7. Click [DT-ID] so that it appears in white on a
black background.
8. Using the keypad in the External Panel
Controller, enter the 6-digit data terminal ID.
NOTE
If the number is not 6-digits long, add “0” at
the beginning.
DT-ID: Data terminal ID code; the num-
ber of the data terminal
C4656P008CA
C4656P009CA
C4656P010CA
C4656P012CA
C4656P013CA
C4656P014CA
C4656P015CA
NEXTNEXT