Filter
Top Products
CF2001P
– 22 –
4004-7715-01
■
Specifying Who Performs Replacements
NOTE
The message that appears a unit must be replaced can be changed to indicate
that either the user or the service representative must perform the replace-
ment. Select the appropriate settings depending on the type of servicing being
performed.
1. Check that the External Panel Controller
appears in the computer screen, and then
display the Tech. Rep. Mode screen. (For
details about displaying the Tech. Rep. Mode
screen, refer to the Service Manual.)
2. Click [System Input].
3. Click [Unit Change].
4. Click [User] or [Service] to select whether
each unit should be replaced by the user or
the service representative.
5. Click [END].
6. Click [Menu], and then click [Fin. Time].
C4004P565CA
C4004P597CA
C4004P584CA
C4004PU02CA
NEXTNEXT