Filter
Top Products
CF2001P
– 2 –
4004-7715-01
2. Unpacking
■ Unpacking the Accessories
1. Remove the accessories from the box, and then check that the following are
enclosed.
(1) Imaging units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
(2) Power cord *1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(3) LED cleaning tool *2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(4) LED cleaning paper *2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(5) Manual holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(6) User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(7) Setup Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(8) Warranty card *3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(9) Power cord instruction *1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(10) Paper size label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(11) Cable clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(12) Support label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(13) Additional information
(Storing the LED cleaning tool) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*1 For Particular area only.
*2 The LED cleaning tool and its paper are not used during setup. Since they will be
needed when the imaging unit is changed or the printer is cleaned, keep them in a
safe place for later use.
*3 U.S.A. and Canada only.
■
Unpacking the Printer
1. Open the printer box, and then remove the box containing the imaging unit.
NOTE
Remove the box containing the imaging unit before removing the box from around
the printer.
2. Remove the box from around the printer.
3. Remove the printer from the plastic bag.
4. Open the two handle covers, and then pull out the handles.
5. Grasp the two handles on the right side of
the printer and the two grips on the left (as
shown in the illustration), and then, while
keeping the printer level, remove it from its
box.
NOTE
The printer weighs about 77 kg (169-3/4
lbs.). The printer must be lifted by at least
two people. When lifting the printer, be care-
ful not to strain your back.
6. Carefully place the printer on a level and
sturdy surface, such as a table.
C4004U003AA
C4004U004AA
NEXTNEXT