Filter
Top Products
IPmux-1/1E Installation and Operation Manual Chapter 4 Troubleshooting and Diagnostics
Performance Monitoring and Troubleshooting Statistics 4-21
Table 4-6. Bundle Connection Status Parameters
Parameter Description
Destination IP
Address
The IP address of the opposite IPmux, to which the bundle is destined.
Next Hop MAC
Address
Layer 2 Applications: the MAC address displayed is the MAC address of the remote IPmux.
Layer 3 Applications: the MAC address displayed is the MAC address of the connected Router.
Connectivity
Status
Disabled: No activity in the channel. The channel is disabled.
OK
: Both the remote and the local IPmux receive Ethernet frames, (however, there may be problems such as sequence errors, underflows, overflows, as
explained below).
Local Fail: The loacal IPmux does not receive Ethernet frames.
Remote Fail
: The remote IPmux does not receive Ethernet frames.
Unavailable: The remote Ipmux does not reply to OAM messages (only applicable when OAM is enabled).
Validation Fail
: The remote Ipmux replies, but there is a configuration error (only applicable when OAM is enabled).
Standby
: Redundant bundle is OK and wiaitng for redundancy switching (only applicable when Redundancy is enabled).
TDM Fail: There is LOS/LOF at the TDM side (only applicable when Redundancy is enabled).
Note: While under Disable or Local Failure or Remote Failure status, the statistic counters will be inactive.