Filter
Top Products
IPmux-1/1E Installation and Operation Manual Appendix E Configuration Menus
General Configuration E-15
Table E-10. Download/Upload Using TFTP Parameters
Parameter Possible Values Remarks
File Name
Command
No Operation,
Software Download,
Configuration Download,
Configuration Upload
Server IP 0.0.0.0 to
255.255.255.255
IP address of the server from which the file is
loaded
Retry Timeout 0 to 10000 Selected retry timeout period (in seconds)
Total Timeout 0 to 10000 Selected total timeout period (in seconds), which
is the maximum time allowed for attempted
transmission
View Transfer Status View the transfer status in real-time. It is updated
every second. The screen is read-only.
To save the parameters and start the transmission process:
• Enter S.
If all parameters are correct, you will be asked for confirmation. After
confirmation, the TFTP session begins. You can view the Transfer Status
(see Figure E-20).
The View Transfer Status values are listed in listed in Table E-11.
1. Boot code download is not possible using TFTP.
2. Reboot the system after you have completed TFTP download via X-Modem
screens.
VIEW TRANSFER STATUS
Status Transferring Data
Error No Error
Use <Esc> key to Exit
Figure E-20. View Transfer Status Window
Table E-11. View Transfer Status Parameters
Parameter Values Remarks
Status Indication
No Operation, Connecting, Transferring Data,
Ended on Time Out, Ended OK, Error
Error Message
Unavailable (no host IP), No Error, File Not Found,
Illegal TFTP Operation, Unknown Transfer ID,
Illegal PDU Size, Illegal File Mode, No Empty Connection,
No Empty UDP Port, Server Overflow
Notes