Filter
Top Products
Appendix E Configuration Menus IPmux-1/1E Installation and Operation Manual
E-26 IPmux-1E Configuration
Analog Channel Configuration
CHANNEL CONFIGURATION
1. Channel Number 1
2. Channel Status Enable
3. Rx Gain -4dBm
4. Tx Gain 0dBm
5. Testing Disable
6. Echo Cancellation Status Disable
ESC. Exit
Select item from the menu.
Figure E-29. Channel Configuration Menu
Table E-17. Analog Configuration
Parameter Possible Values Remarks
Channel Number
1,2,3,4
Selects channel to be configured
Channel Status
Enable
Disable
Channel is enabled
Channel is disabled
Rx Gain -10, -8, -6, -4, -2, 0, 1, 2, 3, 4, 5 (dBm) Sets the gain towards the phone
Tx Gain -10, -8, -6, -4, -2, 0, 1, 2, 3, 4, 5 (dBm) Sets the analog gain as transmitted
from the phone to configure the
analog receiver dynamic range
Testing
Tone Injection
Remote Loopback
Disable
1 kHz tone is injected towards the
local phone
A remote loopback analog signal is
set for IPmux-1E FXS/FXO/E&M
Echo Cancellation Status
Enable, Disable
Selectable only with echo
cancellation module
Main Menu
↓
2. Configuration (Analog)
↓
2. Analog Configuration
↓
3. Channel
Configuration