Filter
Top Products
IPmux-1/1E Installation and Operation Manual Appendix E Configuration Menus
Connection Configuration: CESoIP Mode E-35
Activation Criterion
Activation Criterion
1. Pattern ID 1
2. Tx A 1
3. Tx B N/C
4. Tx C N/C
5. Tx D N/C
ESC. Exit D. Delete N. Next
Figure E-36. Activation Criterion Menu
Table E-23. Activation Criterion Parameters
Parameter Possible Values Remarks
Pattern ID 1 to 4 An OR operation will be performed on the pattern
defined here
At least one pattern must be defined. For each
defined pattern at least one bit must be configured
to either 0 or 1.
Tx A
0, 1
N/C
Defines CAS A bit
Ignored
Tx B
0, 1
N/C
Defines CAS B bit
Ignored
Tx C
0, 1
N/C
Defines CAS C bit
Ignored
Tx D
0, 1
N/C
Defines CAS D bit
Ignored
E.8 Connection Configuration: CESoIP Mode
To configure the Connection:
1. Select 1 to enter the Connection Mode. Use the <Space bar> to select
CESoIP and then press <Enter>.
Main Menu
↓
2. Configuration
↓
3. Bundle
Connection
Configuration
Main Menu
↓
2. Configuration
↓
3. Connection
Configuration
↓
3.
Activation
Criterion