Filter
Top Products
4-4
Cisco Service Control Engine 1000 2xGBE Quick Start Guide
OL-7822-06
Chapter 4 Connect the Management Interfaces and Perform Initial System Configuration
Perform the Initial System Configuration
Setup Command Parameters
Table 4-1 Setup Command Parameters
Parameter Definition
IP address IP address of the SCE 1000.
subnet mask Subnet mask of the SCE 1000.
default gateway Default gateway.
hostname Character string used to identify the SCE 1000.
Maximum 20 characters.
admin password Admin level password.
Character string from 4-100 characters beginning
with an alpha character.
root password Root level password.
Character string from 4-100 characters beginning
with an alpha character.
password encryption status Enable or disable password encryption?
Time Settings
time zone name and offset Standard time zone abbreviation and minutes
offset from UTC.
local time and date Current local time and date. Use the format:
00:00:00 1 January 2002
SNTP Configuration
broadcast client status Set the status of the SNTP broadcast client.
If enabled, the SCE will synchronize its local time
with updates received from SNTP broadcast
servers.
unicast query interval Interval in seconds between unicast requests for
update (64 – 1024)
unicast server IP address IP address of the SNTP unicast server.
DNS Configuration
DNS lookup status Enable or disable IP DNS-based hostname
translation.
default domain name Default domain name to be used for completing
unqualified host names
IP address IP address of domain name server. ( maximum of
3 servers)
TCP port number TCP port number of the RDR-formatter
destination
Access Control Lists