Filter
Top Products
CHAPTER
7-1
Cisco Service Control Engine 1000 2xGBE Quick Start Guide
OL-7822-06
7
Installing a Service Control Application
• Advanced Configuration of the SCE Platform, page 7-1
• Loading and Activating a Service Control Application, page 7-1
Advanced Configuration of the SCE Platform
After you have installed your SCE 1000 platform hardware, checked all external connections, turned on
the system power, allowed the system to boot up, and performed the initial system configuration, you are
ready to install the Service Control application. However, before you install the application, you might
need to perform more complex configurations, which are beyond the scope of this publication.
For further information on system and interface configuration, refer to the following documents:
• Cisco Service Control Engine (SCE) Software Configuration Guide
• Cisco Service Control Engine (SCE) CLI Command Reference
Loading and Activating a Service Control Application
The SCE 1000 platform provides the basic functionalities of Service Control analysis and enforcement.
A Service Control solution requires that a Service Control application be loaded into the platform, to
take advantage of the unique SCE platform capabilities.
Loading and activating an application includes the following stages:
• Downloading the application provided as an SLI file to the SCE 1000 disk.
• Activating the application.
• Configuring the application.
The detailed procedure of how to perform these operations is not specified and described in this manual.
For further details, refer to the following documentation:
• Service Control Application for Broadband User Guide
• Service Control Application for Broadband Reference Guide