Filter
Top Products
CHAPTER
4-1
User Guide for the Cisco Mobile Wireless Transport Manager 6.0
OL-9118-03
4
Getting Started
This chapter provides information about starting and stopping the Cisco Mobile Wireless Transport
Manager (MWTM), and an overview of how to use the MWTM to manage your Cisco IP Transfer Point
(ITP) or Radio Access Network-Optimization (RAN-O) installation.
This chapter includes:
• Starting the MWTM Server, page 4-1
• Starting the MWTM Client, page 4-2
• Discovering Your Network, page 4-4
• Displaying the MWTM Main Window, page 4-22
• Using the MWTM Main Menu, page 4-33
• Accessing the MWTM through a Web Browser, page 4-39
• Loading and Saving MWTM Files, page 4-41
• Using the Windows Start Menu, page 4-43
• Using the Windows Start Menu, page 4-43
• Exiting the MWTM Client, page 4-44
For detailed information about the MWTM-supported platforms, and hardware and software
requirements, see the Installation Guide for the Cisco Mobile Wireless Transport Manager 6.0.
Note The default directory for installing the MWTM is /opt. In commands that call for the default directory,
if you installed the MWTM in a different directory, you must specify that directory instead of /opt.
Starting the MWTM Server
Before starting an MWTM server, verify that:
• Each node uses a supported IOS image
• The MWTM server has IP connectivity to each node
• SNMP is enabled on each node
• (Optional, but recommended) Traps are enabled on each node
• (Optional, but recommended) A trap host is defined on each node